Wednesday, February 1, 2012

Control TELUS digital box and TV Power at Once using Universal Remote Control


The instruction to control TELUS digital box and TV Power at Once using Universal Remote Control can be found:
 http://www.telus.com/imagineportal/Upload/Binaries/Mediaroom_Remote_User_Guide.pdf?_region=AB
But It took me more than 1 hour to set it up.

Step  1: Auto-Searching the Code Library (Program Code 922)

1) Turn on TV. TELUS digital box on or off will not matter
2) Press and while holding a TV selected mode key, press the OK key at the same time.
3) Release both keys and all the mode keys blink twice.
4) Enter the programming code 9 2 2. The mode key you selected in step 3 blinks twice to indicate a successful entry.
6) Point the remote toward the device, and press PLAY until TV power off. If it does not work, you may need to try several time.
6) Send the current code – Press the POWER key on the remote to send the current code. If the
device turns back on, press the ENTER key. If TV is not on, press Play again.
For me, the first time , TV is not on. I pressed PLAY second time and TV is  ON.
I pressed ENTER key to save the code.


Step 2. Control TELUS digital box and TV  Power at Once

1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 7 7 by pressing the
numeric keys on the remote. The STB mode key
blinks twice to indicate a successful entry.
5. For the first device, press the STB key. The STB
mode key blinks twice.
6. For the second device TV, press the TV mode key . The selected mode key blinks twice.
7. Press the ENTER key to complete the power switch control programming. The last selected mode key blinks three times to indicate a successful entry.

Step 3.(After step 1 and step, I found I can not control the volume, I need to setup volume control).  Control Volume for TV
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 5 5 by pressing the number keys on the remote. The STB mode key
blinks twice indicating a successful entry.
5. Press and release the TV mode key.  The selected mode key blinks three
times to indicate a successful entry.

No comments:

Post a Comment